This Metal Coil Cut to Length Machine is used for processing the steel coil into the desired length steel sheet and stacking them in order through decoiling, leveling, measuring and shearing.
Cut-to-length, also know as a blanking line or CTL, mainly composed of the decoiler, pinch roll and leveler, length controller, shearer and stacker etc., accompany of the feeder, side guider, conveyor etc.
We can Supply RTQC High Speed Metal Coil Cut to Length Machine with the max. speed is 80m/min. And we can supply the low speed 24m/min one for 0.3-3.0mm thickness.

This line is professional equipment is used for processing the hot rolled steel coil into the desired length steel plate (thickness: from 4mm to 25mm) and stacking them in order through decoiling, leveling, measuring and shearing.
Cut-to-length, also know as a blanking line or CTL, mainly composed of the decoiler, pinch roll and leveler, length controller, shearer and stacker etc., accompany of the feeder, side guider, conveyor etc.
For "SS" or "P+O" material, auto stacker will work for them. Edge trimming and scrap recoiler is optional for material request.

NEW (0.5-3.0) × 1600 stainless steel decoiling, leveling and cutting to length line Machine with edge trimming and scrap recoiling device.
This equipment is used for processing the steel coil into the desired length steel sheet and stacking them in order through decoiling, leveling, measuring and shearing.

RTLC steel sheet leveling machine & Economic Shearing Line (0-24m/min leveling speed) (i.e. Cut to Length Line, leveling line or blanking line) is used for processing the CR/HR steel coils less than 3mm thickness through decoiling, leveling & cutting then turned into flattened plate with desired length.
It takes the centralized control with CNC control system. The cutting length, speed, pieces are all designed & controlled by the program.
When it works automatically, the computer controls the whole process of leveling & shearing to compensate the error.
When the need shearing number is reached the line can stop automatically.

We can Supply RTQC CNC High Speed Metal Coil to Sheet Cut to Length Line with the max. thickness is 3mm, width is 2000mm & speed is 80m/min.
This Sheet Metal Cutting Line is used for processing the cold rolled carbon or galvanized steel coils less than 3mm thickness through decoiling, leveling, and cutting and then turned into flattened steel plated with desired length with semi-automatization.

This Rotary Flying Shear Cut to Length equipment is used for processing the cold rolled steel coils for decoiling, leveling, measuring & cutting, then, stacking the steel sheets, packing & stowing.
Decoiler: Shrink and expend depended on the hydraulic tank, use the hydraulic motor to make the decoiler work.
Leveler: Adopt different ways of roll; the clearance can adjust both outer and inner. There is angle become bigger from the inner to the outer, it can level irregular radian better.
Loop Bridge: It is used for better working for side guide device and also removes the running speed difference.

Leveler machine is the core part of cut to length line, we have 2-HI (two rows working rollers), 4-HI (two rows working rollers + two rows backup rollers), 6-HI levelers (two rows working rollers + two rows immediate rollers two rows backup rollers ) for different leveling result. Usually for small thickness, choose 4-HI and 6-HI leveler, for big thickness, choose 2-Hi and 4-HI leveler. And 6-HI leveler is mostly used for stainless steel and well as high precision and surface requirement work-pieces.