The RT32 pipe rolling mill is intended for manufacturing of round/square pipe of Φ13mm-Φ50.8mm with Thickness of 0.6mm–2.0mm from cold-rolled, hot-rolled and galvanized coil strip.

This RT32 automatic pipe production line is used to produce straight seam automatic oil pipes and tubes by means of steel slit strips with its subsequent welding into tube, edge heating by means of solid state high-frequency welder, longitudinal straight seam welding in rolls of tube welding machine, cooling, further sizing or shaping and on-stream cutting of endless tube in measured lengths.
Finished product will be of round, square, rectangular pipe.

SLIT COIL ---- Un-coiler ----Storage/ Vertical accumulator ---- Forming ---- Welding ---- Cooling ---- Sizing ---- Cutting saw ---- Run out table ---- Finishing ---- Pipe collecting and packaging

• 

1.2. OUTPUT
(1). Round pipe dia.: 13-50.8mm
    Wall thickness: 0.6-2.0mm
(2). Square Tube Size: 10×10-40×40mm
    Wall thickness: δ≤1.5mm (SQ, REC Pipe)
(3). Length: 4-8meter (can be longer)
(4). To-length accuracy: ≤±3mm

1.3. LINE DATA
(1). Line Direction (optional): From Right to Left or from Left to Right(Viewed from operator side; will be double confirmed)
(2). Line Speed: 20-90/min
(3). Power for equipment motor: about 131.5KW
(4). Power for HF electric: 150KW (Solid State)

Machine Configuration:

(1) Double-side Un-coiler (Manual expansion)…………………………………………………………… 1 unit
(2) Vertical Accumulator………………………………………………………………….………….……..……… 1 unit
(3) Forming, Welding and Sizing mill…………………………………….……………………..…..………… 1 unit
      A) Feeding & Leveling device
      B) Forming machine
      C) Guiding, Squeezing, Welding & Deburring device
      D) One set of cooling water tank
      E) Sizing mill
      F) Main Driving System
(4) Computer-controlled Tracking Cutting Saw (Circular Saw Cutting) ………………………… 1 unit
(5) Finished Pipe Passing Conveyor (Run out table) ………………………………………………… 1 unit
(6) Solid State High Frequency Welder…………………………………………………………………..…… 1 unit
(7) Pneumatic System…………………………………………………….…………………………………………… 1 unit
(8) Electrical System with PLC Control and DC Drive Control System ..………..………………… 1 unit

Delivery time:

90~120 days

Shipping container:

2×40’HQ + 1×40’HQ

1. 

   Double Side Uncoiler

2. 

   Vertical Accumulator

1. 

   Roll Forming Device

2. 

   Welding And Scraping Device

1. 

   Cooling Tank

2. 

   Sizing Unit

1. 

   Straightening Unit

2. 

   Cold Cutting Saw Machine

•